The company PrimaKlima has launched an innovative tube fan on the market together with the well-known company Ziehl-Abegg. The PK125-EC tubular fan shines above all with its very energy-saving consumption, as it has been equipped with a new EC motor technology.

In addition, the tube fan has an integrated speed control that does not produce any humming noises during the dimming process, these are now a thing of the past. The tube fan in the dimmed state therefore only consumes the energy that corresponds to its speed (speed-dependent).
In addition, this model has an upper limiter that allows the power (speed) to be adjusted in the upper range.

As soon as the set temperature is exceeded, the fan speed automatically increases. When the room temperature is back in the set range, the fan speed drops back to the set minimum value.

The maximum speed can also be limited with an integrated rotary knob.

Please note:
The PK125-EC-TC tube fan requires about 20 seconds reaction time when adjusting the speed (potentiometer value).

Advantages in the lower operating range:

• No humming noises

• Linear power consumption to speed

• Power consumption is lower when printing is built up

• Long service life of the motor, as the motor does not heat up at 30-40 watts

• Voltage: 230V 50/60 Hz

• Consumption at full load 100%: 170W, 0.74A, pressure build-up of 1000Pa

• Consumption at 50%: 0-60 watts, 0-480m³, twice the pressure build-up than a compatible AC fan

• Pressure: 1000Pa at full load

• Energy efficiency: A++

• Max. working temperature 42°C

• Only suitable for indoor use