Combo pen P160 Pro pH, EC, TDS, PPM, Temp meter

The new version of the Combo P and P160 Pro convinces with a modern, robust housing.

A major advantage of this model is that the EC value is calibrated analogue, so the calibration fluid does not necessarily have to be 25ºC warm.

Calibration without any deviations. EC calibration fluids are extremely sensitive to temperature, in contrast to pH.

The electrode can be easily replaced in the event of wear or defect.

This model comes in a robust case for storage and with pH 4.01, pH 7.00 and EC 14.13 calibration fluids, so that the calibration of the meter can be done at a later date.

The Combo P and P160 Pro meter is ideal for measuring pH, EC, PPM, TDS and temperature values in liquid plant food, in water from swimming pools and ponds.

At the touch of a button, you can easily and quickly switch between the different parameters.

The meter is pre-calibrated and supplied with batteries.

How does the meter work?

• Remove the protective cap.

• Carefully clean the electrode with distilled water and dry it.

• Press the on/off switch to turn on the meter.

• Hold the meter vertically and up to the edge of the solution and let it circle slightly. Wait a few seconds for the values to appear correctly on the display.

• Use the Temp/CAL button to switch between the temperature and Fahrenheit units.

• Use the PH/EC button to switch between pH and EC.

• To switch between EC, TDS and PPM parameters, the meter must be in EC mode. Then press and hold the PH EC button for at least 5 seconds to move on to the next

• Switch parameters.

• After use, rinse the electrode with water and press the on/off switch to turn off the meter.

Verpackungsinhalt

• 1 x Combo Pen P160 Pro

• 1 x A sturdy case

• 1 x calibration fluids pH 7.00 25 ml

• 1 x calibration fluids pH 4.01 25 ml

• 1 x Calibration Fluids EC 14.13 25 ml

• 1 x Screwdriver for calibration

• 1 x User Manual (NL - EN - DE)

Measuring range

• pH: 0.1~14.0 pH

• EC: 0.0 ~ 19.9 mS/cm

• CF: 0.0 - 199 CF

• PPM: 0.0~1999 PPM

• Temp.: 0°C ~ 50°C (32°F ~ 122°F)

Resolution

• pH: ± 0.1 pH

• EC: 0.1 mS/cm

• TDS: 0.01 PPT

• PPM: 10 PPM

• Temp.: 0.1°C (1.0ºF)

Measurement accuracy

• pH: ± 0.1 pH

• EC: ± 2% F.S.

• TDS: ± 2% F.S.

• PPM: 10 PPM

• Temperature: ±0.5°C (32°F)

• Temperature compensation: 0°C - 50°C (32°F - 122°F)

• PPM scale 700 ppm

Calibration

• pH: 2 point auto 4.0 - 7.0 pH

• EC manual calibration suitable for any EC buffer solution

Properties